RT-1000 Specifications
| Frequency range * | 118 to 136,975 MHz / 156 ... 174 MHz | |
| Operating channels | 760 in the airband / 720 in the seaband; 10 channels preselectable |
|
| Channel spacing | 25 kHz | |
| Type of modulation to be detected | A3E, F3E, A3X (ELT-modulation) | |
| System accuracy ** | ±2° RMS (with antenna) | |
| Sensitivity *** | =6 µV/m (without antenna amplifier) | |
| Polarisation | vertical | |
| Polarisation error | =1°(with field vector rotation up to 45°) | |
| Cone of silence | approx. 35° referred to the vertical | |
| Power supply | AC: 115 / 230 V ±15%; 47 ... 63 Hz DC: 24 V -10% / +20%; automatic switch-over to DC voltage in case of AC mains failure |
|
| Power consumption | Controller unit : max. 15 VA Receiver unit: max. 10 VA (52 VA with heater) |
|
| Temperature ranges | Operating temperature : Antenna: -40° ... +80° C Receiver unit: -40° ... +60° C Controller unit: -20° ... +55° C Storage temperature: -40° ... +60° C |
|
| Interfaces | serial V.24 (RS232) parallel |
|
| Bearing display | Response time ≤ 0.3 s | |
| A) | Digital: 3 digits with 7-segment LED indicator Resolution: 1° Bearing reference: QDR Updating rate: approx. one indication/s |
|
| B) | Dual compass dial : 2 concentrical circles of LED points Resolution: 10° Bearing reference: QDR Updating rate: Outer circle: approx. one indication/s Inner circle: 47 indications/s |
|
| Monitoring | Built-in speaker : Modulation mode: A3E Monitor output: approx. 500 mW to 4 ... 8 Ω Line output: 600 Ω, balanced , 0 dBm, m = 0.6 |
|
| Ground transmitter suppression | with external contact to ground | |
| Dimensions / Weight | Controller: 9"-desk-top model 3 UH, prepared for rack installation Dimensions (H x W x D): 132.5 x 448 x 370 mm Weight: 7.2 kg (9.9 kg ****) Receiver unit: Non-metallic cabinet for wall mounting (IP 65) Dimensions (H x W x D): 250 x 340 x 285 mm Weight: 6.5 kg Antenna system: Dimensions (Diameter x H): 400 x 1120 mm with lightning rod and mast: 400 x 3400 mm Weight: 3.6 kg |
|
| Lateral thrust due to wind | with constant wind speed 150 km/h approx . 135 N 180 km/h approx . 195 N (data with lightning rod and mast) |
|
| * Not applicable for variant B (depends on type of receiver). Frequency range depends on integrated software. ** Bei ungestörtem Wellenfeld und ausreichender Feldstärke. Die Messung erfolgt bei konstanter Frequenz durch Verändern der Einfallsrichtung, wobei die Peilantenne auf einem Drehstand gedreht wird, um Geländeeinflüsse auszuschließen. *** Bei vertikaler Polarisation für Anzeigeschwankungen von ±1° **** Controller variant A. |
Print page
